Aanbieding!

IStream AIO IACO1 Dante 2-Channel XLR Analog Output Adapter For Dante Audio Network

Oorspronkelijke prijs was: 199,00 €.Huidige prijs is: 99,99 €.

The iStream Dante AIO 2-Channel XLR Analog Output Adapter Enables the output of analogue audio line signals from a Dante network. Alllowing you to send analog audio to streaming encoders or analog power amplifiers and powered speakers over a Dante audio network

Use Analog Gear with Dante Network
2 x XLR, Line-level Analog Outputs
Plug-and-Play Operation

Artikelnummer: IS-AIOIACO1 Categorieën: Dante Audio, Pro Audio

Koop met een gerust hart
Koop online de beste kwaliteit
Winkel met gemak
Risicovrij winkelen met retouren

iStream AIO IACO1 Dante 2-Channel XLR Analog Output Adapter for Dante Audio Network

Name: Hoogwaardige IStream AIO IACO1 Dante 2-Channel XLR Analog Output Adapter For Dante Audio Network verrassingen van Beveiligingcamera.com - Het perfecte cadeau.
SKU: IS-AIOIACO1
Price: 99.99 EUR
Availability: InStock

The iStream Dante AIO 2-Channel Analog Output Adapter Enables the output of analogue audio line signals from a Dante network. Allowing you to use the analog gear you already own with your Dante audio network and Streaming Gear. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.

The compact AIO is automatically discovered by the network and is ready to use when connected. It features two balanced, line-level outputs equipped with XLR connectors and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.

The AIO supports Dante Audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).

KEY FEATURES

Cost-effective solution for adapting analog gear to your Dante network
Plug-and-play operation
Balanced, line-level dual-channel analog output adapter
2 ch dante Inputs, 2 ch analog outputs
Replaces multiple analog or multi-core cables with only a network cable
Compact design, easy to use
Sample rates up to 96 kHz
Wide dynamic range
High signal-to-noise ratio
Low total harmonic distortion
Configurable gain and attenuation
Dante Audio over IP and AES67 RTP transport formats
Power over Ethernet (PoE) support
Compatible with Dante Domain Manager (DDM)

APPLICATIONS

Send audio to analog power amplifiers and powered speakers over a Dante audio network
Patch DSPs, analog compressors and equalizers into a Dante system using a combination of iStream AIO Dante adapters
Connect Dante audio network to analog XLR inputs of your streaming encoder

SPECIFICATIONS

iStream
Model	AIO IACO1
Channel	2ch dante inputs, 2ch analog outputs
3 PIN XLR	2 x XLR Male connector
Network	1 x RJ45 port
Analog audio interface	XLR
Output impedance	100 Ω
Dante Network audio interface	RJ45
Frequency response	20Hz to 20kHz (-/+ 0.5dB)
Maximum signal level (balanced)	+18dBu / +4dBu / 0dBu
Dynamic range	> 100dB
SNR (signal to noise ratio)	> 100dB
THD (total harmonic distortion)	< 0.01% (+4dBu)
Size (LxWxH)	652mm x 32mm x 22mm
Weight	0.2 kg

SETUP

Download and install the Dante controller from audinate website
Connect the device to the switch using the Dante network with a network cable
Connect your audio device through the XLR output interface
Search for devices in Dante controller software, and select your device to configure
On the routing page match input with output column
Once setup and configured your iStream Dante audio device will remember and save the settings