MuxLab 500086 Digital Audio Extender Kit over Cat 5e/6 Cable (100m)
The MuxLab Digital Audio Extender Kit 500086 is a versatile digital audio standards extender and converter.
The product allows one (1) Digital Coax (S/PDIF), or Digital Optical (TOSLINK) source to be connected to a Digital Audio Receiver supporting either Digital Coax (S/PDIF), or Digital Optical (TOSLINK) inputs. Outputs on the 500086 receiver unit are simultaneous.
The audio transmission signal can be distributed up to a distance of 100m in a point-to-point configuration over single Cat5e/6.
The extender supports most standards to transmit two channels of uncompressed lossless PCM audio or compressed 5.1/7.1 surround sound, such as Dolby® Digital Plus or DTS-HD High Resolution Audio (multichannel digital audio Dolby Digital® 5.1, DTS, and Dolby® True HD).
KEY FEATURES MUXLAB 500086
- Converts Digital Optical (TOSlink) to Digital Coax (S/PDIF), Digital Coax (S/PDIF) to Digital Optical (TOSlink)
- Sample rate: up to 96kHz
- Bit rate: 24bit S/PDIF compressed and uncompressed bit stream
- Input (Tx): one (1) Digital Coax RCA (S/PDIF), one (1) Digital Optical (TOSlink)
- Output (Tx): one (1) RJ45
- Output: one (1) Digital Coax RCA (S/PDIF), one (1) Digital Optical (TOSlink) – outputs are simultaneous
- Input (Rx): one (1) RJ45
- Switch for selecting between S/PDIF and TOSlink inputs on source side (Tx unit)
- Power over cable – either Tx or Rx unit can be powered
- 1m Digital Optical (TOSlink) cable included
- 61 x 57 x 25mm
- Weight: 0.45kg
INCLUDED BY DEFAULT
- MuxLab 500086 Digital Audio Extender Kit over Cat 5e/6 Cable (500′ Range)
- Power Supply
- Optical Cable










Beoordelingen
Er zijn nog geen beoordelingen.