MuxLab 500765 Dante/Quad Channel Audio PoE Gateway
The MuxLab Dante/Quad Channel Audio PoE Gateway permits non-Dante compatible analog audio equipment to interface with Dante compatible professional audio equipment. It can be used to transmit dual two-channel or quad single-channel full-range audio—20 Hz to 20 kHz—over the network to Dante. In addition, dual two-channel or quad single-channel balanced analog audio signals may also be received from Dante compatible equipment in the same manner.
The unit may be connected via Cat 5e/6 cable up to 100m from an Ethernet switch. The Dante/Quad Channel Audio PoE Gateway includes four single-channel balanced analog audio-in and four single-channel balanced analog audio-out ports via phoenix connectors. The quad single-channel balanced analog audio-in ports may be connected to line-level balanced analog audio signals or to line-level balanced microphones.
Furthermore, the quad single-channel balanced analog audio-out ports may be connected to balanced analog audio amplifiers supporting line-level inputs, such as a zone amplifier (100W), or to two pairs of powered speakers for direct sound output. Finally, the Dante/Quad Channel Audio PoE Gateway can be powered by a PoE Ethernet switch. Cables and a power supply are not included.
KEY FEATURES MUXLAB 500765
- Interface analog audio equipment to Dante audio equipment
- Supports dual two-channel or quad single-channel full-range balanced analog audio from 20 Hz to 20 kHz
- Transmission up to 100m over Cat 5e/6
- Supports quad single-channel balanced analog audio-in and quad single-channel balanced analog audio-out from
- Dante audio equipment
- Balanced audio ports may be interfaced to unbalanced audio ports when only 2 of 3 pins are used per channel
- IP managed for remote control
- Controllable via the Audinate Dante controller software
- PoE powered
INCLUDED BY DEFAULT
- MuxLab Dante/Quad Channel Audio PoE Gateway













Beoordelingen
Er zijn nog geen beoordelingen.